Industrial Oils

Approx. Rs 800 / LitreGet Latest Price

Product BrochureProduct Details:

Silicone Oils offered by us is a water clear silicone fluid. It is made available in viscosity ranking from 01 centistokes to 1.00.000 centistokes. It is used in a variety of application functions including as a release material where it is used along/as part of compounded formula. Here, Silicon oil helps in providing odorless, non-toxic, non-carbonizing mold release for plastic, rubber and metal die castings.

 

Features:

• A little change in physical properties over wide temperature span
• Relative Viscosity temperature slope & serviceability from -40 to 500 F (-40 to 315 C)
• Excellent water repellent
• Good dielectric properties over wide range of temperature & frequencies
• Low surface tension that readily wets clean surfaces to impart water repellent as well as release characteristics
• Other than this, low toxicity tests have also established that Silicon oil is essentially non toxic & non irritating (although temporary dis-comfortable if rubber gets into the eye). Further, Silicon oil also exhibits heat stability and oxidation resistance, non-greasy, non acidifying and virtually odorless, thus making widely preferred by the clients.

Uses:

• It is used in a variety of application functions, products and processes. These include:

As release material:

• It is used along/as part of compounded formula, where silicon oil provides odorless, non-toxic and non-carbonizing mold release for plastic, rubber and metal die castings.

As a foam preventing:

• A very small amount of fluid effectively controls foam in many procession operations especially in non-adieus systems.

As a mechanical:

• It has excellent viscosity-temperature characteristics, thermal and chemical stability that enhances breakdown resistance.

Silicon oil also has outstanding usage in mechanical/hydraulic applications. Typical uses include:

• Hydraulic stabilizers
• Damping mediums

As a surface material:

• By added vinyl plastisols & liquid springs, silicon oil helps in improving Flow characteristics
• De-aerating and lubricating surface of completed part

As a lubricant:

• The fluid provides excellent usage for plastic & elastomeric surfaces.

Approx. Rs 200 / PieceGet Latest Price

Product BrochureProduct Details:

We are engaged in offering Temper Oil to our clients. Our range of all products is widely appreciated by our clients.

Approx. Rs 200 / LitreGet Latest Price

Product BrochureProduct Details:

Application areas:

These oils are recommended for lubrication of pneumatic equipment such as rock drills, jack hammers, stoppers, drifters, chippers, wagon drills, tempers & pavement breakers etc. They are also used in small in-plant pneumatic tools like grinders, filing tools, drills, tapers, impact wrenches, rivetters, hoists etc.

Performance benefits:

• Most effective extreme pressure characteristics
• Good adhesive characteristic
• Emulsifying agent prevents the condensed moisture from wetting the metal surfaces
• Excellent anti-corrosion and anti-rust properties
• Good demulsibility property
• Excellent flow characteristics to ensure proper feeds and dispersion through oilers

Special Features

NU-MATIC is a line of first quality rock drill lubricants formulated for the lubrication of pneumatic tools. They have pronounced extreme-pressure and rust-preventive properties. They contain a tackiness agent to give good adhesive characteristics and an emulsifying agent that helps in forming highly stable emulsions in the presence of water. They are formulated to provide effective protection to metal surfaces against acidic corrosion.

 

Approx. Rs 200 / LitreGet Latest Price

Product BrochureProduct Details:

Application areas:

All types of heat transfer applications. This grades finds extensive application in textile, pharmaceuticals, chemical and processing industries.

Detail Description

HPCL markets thermic fluids under the brand names of HYTHERM. These grades are developed to provide performance in broad range of application in textile, chemical, paint & varnish and petrochemical industries. These grades are formulated from specially derived petroleum base stocks having exceptional resistance to degradation during high temperature use. With thousands of satisfied customers over the years and millions of liters of Thermic fluid sold and repeat orders being executed HYTHRM grades command market leadership in thermic fluids segments.

HYTHERM is undoubtedly the first choice for all customers. HPCL has its own lube base oils which ensures consistency in quality of Lube base oils leading to uniformity of the finished oil parameters.

HYTHERM 500

The product is manufactured from petroleum stocks produced by special refining process in which the thermally unstable components are removed. HYTHERM 500 is recommended in service involving a maximum bulk oil temperature of 290°C. In addition, it has the following benefits.

• Excellent oxidation & chemical stability
• Good heat transfer properties
• Low volatility
• Non-corrosive and non-toxic

 

Approx. Rs 400 / KgGet Latest Price

Product BrochureProduct Details:

Silicone Oil

Silicone oil suitable for electronic cooling in magnetrons, klystrons and other high heat producing electronic devices. They can also be used as damping fluids in the dashpots of time delay relays, as a coating for glass and ceramic electronic parts to maintain high surface resistivity, as lubricant for rubber and plastic surfaces and as moisture repellant lubricants for clocks, timers, switches, television tuner contacts and other electronic devices

PACKING: 5 Litre Jerry Can, 20 Litre Pail Owing to evolving packaging solutions, the user is requested to kindly check the availability of a specific pack size prior to standardization.

Approx. Rs 200 / LitreGet Latest Price

Product BrochureProduct Details:

Transformer Oil

Transformer Oil BSI Inhibited is a Highly refined, naphthenic transformer oil. For use in severe conditions, such as high ambient temperatures, where oxidation-resistant and thermally stable insulating oils meeting IEC 60296-2003 Class IA or BS148:1998 Class IA specifications are recommended. It does not contain polychlorinated biphenyls (PCBs).

There are two main types of transformer oil used in transformers

1. Paraffin based transformer oil
2. Naphtha based transformer oil

Naphtha oil is more easily oxidized than paraffin oil. But the product of oxidation – i.e. sludge – in the naphtha oil is more soluble than the sludge from the paraffin oil. Thus sludge of naphtha-based oil is not precipitated in the bottom of the transformer. Hence it does not obstruct convection circulation of the oil, means it does not disturb the transformer cooling system.

Although Paraffin oil has a lower oxidation rate than Naphtha oil, the oxidation product (sludge) is insoluble and precipitated at the bottom of the tank. This sludge acts as an obstruction to the transformer cooling system.

applications

• Transformer
• Oil-immersed switchgear
• Circuit breakers
• Oil-filled capacitors
• Tap changers
• Electrical reclosers
• Fuses

Features & Benefits

• Oxidation resistance prevents sludge, deposits, and soluble compounds in high ambient temperatures or extended service conditions
• Efficient conductive heat transfer improves component cooling performance
• Low solvency protects electrical wire enamels
• Oxidation Stability
• Rapid arc quenching reduces contact erosion
• High dielectric strength and low dissipation factor provide excellent insulating characteristics

 

Approx. Rs 200 / LitreGet Latest Price

Product BrochureProduct Details:

Gear Oil

Gear Oil specially formulated with a new generation extreme pressure additive which is chlorine-free and offers long term protection against rust and corrosion while simultaneously keeping gear parts clean and also ensuring good filterability. Premium antioxidants supplemented by the synthetic base used provide an extra-long service life in applications.

Applications

• specifically recommended & developed for lubricating the heavily-loaded gearboxes and rolling element bearings of industrial gearboxes.
• It is designed for use in industrial gearboxes including in heavily loaded step-up spur/ helical/ herringbone/ bevel/ planetary gearboxes, crushers, hoists, conveyors, winches, machine tools, and lathes. It can also be used in chain drives, sprockets, plain and anti-friction bearings, and slide guides.

Features & Benefits

• High thermal stability EP system helps maintain clean gear and bearing surfaces
• An Effective EP system forms a protective film in areas of metal-to-metal contact, minimizing wear rates and maintaining efficient transfer of power
• Effective oxidation inhibitors and copper passivator minimize oil oxidation, limiting viscosity increase and promoting long drain intervals
• Exceptional anti-wear characteristics
• Highly appropriate for applications under heavy conditions Excellent friction reduction
• Excellently recommended in a wide range of temperatures

Extends service lifetime thus minimizing costs and maximal efficiency

Approx. Rs 1,800 / LitreGet Latest Price

Product BrochureProduct Details:

Product Info

Refrigeration Oil is a high-quality essentially wax-free oil for the lubrication of compressors used in refrigeration and air conditioning systems. The product series is recommended for use with ammonia, carbon dioxide, and halogenated refrigerants.

Refrigeration oil is manufactured from naphthenic base oils selected to meet refrigeration compressor manufacturers’ requirements. The product series offers particularly good low-temperature properties and high stability, minimizing varnish and sludge formation over extended operating periods.

This Product is dehydrated and packaged to resist moisture.

Applications

• Refrigeration compressor oil recommended for use with ammonia, carbon dioxide, and chloroform- and hydrochlorofluorocarbons (CFCs & HCFCs — freon) as well as sulfur dioxide and ethylene chloride refrigerants.
  Capella WF product series delivers very low freon floc and pour point performance and offers chemically stable performance in presence of ammonia and fluorinated hydrocarbons. For this, they make an excellent choice for ammonia systems with the minimum evaporator temperature as low as –50°C (provided evaporator hot flush capability), and fluorinated hydrocarbon refrigerants with minimum evaporator temperatures of –45°C (R12), –35°C (R22) and –25°C (R502) respectively.
  For ammonia systems with minimum evaporator temperatures of –60°C, Capella A is recommended.
  For systems containing hydrofluorocarbon (HFC) refrigerants such as R134a, R404a, R507, etc., Capella HFC is recommended.

The viscosity grade for the application should be based on the equipment manufacturer’s recommendation.
Capella WF oils satisfy the requirements of hermetically sealed air conditioning compressors or the many types
of smaller units. Capella WF oils are registered by NSF and are acceptable as a lubricant where there is no possibility
of food contact (H2) in and around food processing areas. The NSF Nonfood Compounds Registration
The program is a continuation of the USDA product approval and listing program, which is based on meeting regulatory requirements of appropriate use, ingredient review, and labeling verification.

Features

• Refrigeration oils help provide maximum wear protection to the refrigeration compressor or system in which they are used. Capella WF oils are manufactured using especially refined naphthenic mineral oils. Carefully selected base stocks assure the exceedingly low pour points necessary for refrigeration compressor lubricants. They are highly refined and specially treated to help resist the sludging action of refrigerants in the presence of high temperatures and metal catalysts.

Available PKG: 20L, 208L Drum.

 

Approx. Rs 200 / LitreGet Latest Price

Product BrochureProduct Details:

We can offer our customers a wide range of Engine Oils that are manufactured using quality additives as well as base oils. As a leading manufacturer in this category, our expertise lies in ensuring that these oils are absolutely environment friendly as well as assist in reducing friction in engines. Further, we offer it to our customers at at market leading prices.